Datasheet HY2002 - ILP Electronics IC, AMP, POWER, , 60 W, 2002 — 数据表

详细说明

Manufacturer: ILP Electronics

Description: IC, AMP, POWER, , 60 W, 2002

Download Data Sheet

Docket:
DATA SHEET HY2002 60 WATTS
The ILP HY2002 Power Amplifier is a fully encapsulated high quality power amplifier with Integral heatsink.

By selecting the appropiate mains transformer and the programming link on the PCB the amplifier can be used with 4 or 8 loads with the automatic adjustment of input sensitivity. Mounting can be achieved by the use of T-slots in the heatsink and the nuts and bolts provided.
TYPICAL SPECIFICATIONS
Parameter Output Power Frequency Response (-3dB) Total Harmonic Distortion @ 1kHz Signal to Noise Ratio (DIN AUDIO) Slew Rate typical Rise Time Input Sensitivity Input Impedance Damping Factor(8 @ 100Hz) Load Impedance (programmable) Maximum D.C. rails (8 load) Size Width x Height x Extrusion Cut Weight Value 75W rms. Max 15Hz - 50kHz 0.005% 100dB 15V/µS 5µS 500mV rms. 100K >400 4 or 8 ±40V 120x85x30mm 295g
· · · · · · · ·

Specifications:

• Amplifier Type: Power
• Bandwidth: 50 kHz
• Base Number: 2002
• Damping Factor: 400
• Dimensions: 30 x 120
• Frequency Response: 15 Hz to 50 kHz
• IC Generic Number: 2002
• Input Impedance: 100 kOhm
• Input Offset Voltage Max: 500mV
• Input Voltage: 500mV
• Load A Impedance: 4 Ohm
• Load B Impedance: 8 Ohm
• Load Impedance Min: 4 Ohm
• Load Impedance: 4 Ohm
• Logic Function Number: 2002
• Loudspeaker Fuse Current @ 4ohm: 2.5 A
• Loudspeaker Fuse Current @ 8ohm: 2 A
• Mounting Type: Through Hole
• Number of Amplifiers: 1
• Number of Channels: 1
• Number of Pins: 6
• Operating Temperature Range: 0°C to 85°C
• Output Power Pout: 60 W
• Output Power: 75 W
• Package / Case: Rectangular
• Power Rating RMS: 60 W
• Signal to Noise Ratio: 100 dB
• Slew Rate: 15
• Supply Voltage + Nom: 40 V
• Supply Voltage - Nom: 40 V
• Supply Voltage Max: 40 V
• THD + N: 0.005%
• Total Harmonic Distortion: 0.005%

RoHS: Yes