Datasheet Texas Instruments THS4521IDGKT — 数据表
制造商 | Texas Instruments |
系列 | THS4521 |
零件号 | THS4521IDGKT |
超低功耗轨至轨输出全差分放大器8-VSSOP -40至85
数据表
THS452x Very Low Power, Negative Rail Input, Rail-To-Rail Output, Fully Differential Amplifier datasheet
PDF, 2.3 Mb, 修订版: H, 档案已发布: Jun 18, 2015
从文件中提取
价格
状态
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
打包
Pin | 8 |
Package Type | DGK |
Industry STD Term | VSSOP |
JEDEC Code | R-PDSO-G |
Package QTY | 250 |
Carrier | SMALL T&R |
Device Marking | 4521 |
Width (mm) | 3 |
Length (mm) | 3 |
Thickness (mm) | .97 |
Pitch (mm) | .65 |
Max Height (mm) | 1.07 |
Mechanical Data | 下载 |
参数化
2nd Harmonic | 133 dBc |
3rd Harmonic | 141 dBc |
@ MHz | 0.001 |
Acl, min spec gain | 1 V/V |
Additional Features | Shutdown |
Architecture | Voltage FB |
BW @ Acl | 145 MHz |
CMRR(Min) | 80 dB |
CMRR(Typ) | 102 dB |
GBW(Typ) | 95 MHz |
Input Bias Current(Max) | 900000 pA |
Iq per channel(Max) | 1.25 mA |
Iq per channel(Typ) | 1.14 mA |
Number of Channels | 1 |
Offset Drift(Typ) | 2 uV/C |
Operating Temperature Range | -40 to 85 C |
Output Current(Typ) | 55 mA |
Package Group | VSSOP |
Package Size: mm2:W x L | 8VSSOP: 15 mm2: 4.9 x 3(VSSOP) PKG |
Rail-to-Rail | In to V-,Out |
Rating | Catalog |
Slew Rate(Typ) | 490 V/us |
Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
Total Supply Voltage(Min) | 2.5 +5V=5, +/-5V=10 |
Vn at 1kHz(Typ) | 5.2 nV/rtHz |
Vn at Flatband(Typ) | 4.6 nV/rtHz |
Vos (Offset Voltage @ 25C)(Max) | 2 mV |
生态计划
RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: THS4521EVM
THS4521EVM Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: REF6025EVM-PDK
REF6025 Voltage Reference Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: PP-SALB2-EVM
Smart Amplifier Speaker Characterization Board Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
应用须知
- DC Output Errors in a Fully-Differential AmplifierPDF, 334 Kb, 档案已发布: May 25, 2010
- Using single-supply fully diff. amps with neg. input voltages to drive ADCsPDF, 105 Kb, 档案已发布: Nov 15, 2010
- Using fully differential op amps as attenuators, Part 1PDF, 554 Kb, 档案已发布: May 1, 2009
- Converting single-ended video to differential video in single-supply systemsPDF, 212 Kb, 档案已发布: Sep 16, 2011
- Using fully differential op amps as attenuators, Part 2PDF, 531 Kb, 档案已发布: Jul 14, 2009
- Using fully differential op amps as attenuators, Part 3PDF, 568 Kb, 档案已发布: Oct 4, 2009
- Analysis of fully differential amplifiersPDF, 295 Kb, 档案已发布: Mar 11, 2005
- Fully-Differential Amplifiers (Rev. E)PDF, 867 Kb, 修订版: E, 档案已发布: Sep 19, 2016
Differential signaling has been commonly used in audio, data transmission, and telephone systems for many years because of its inherent resistance to external noise sources. Today, differential signaling is becoming popular in high-speed data acquisition, where the ADC’s inputs are differential and a differential amplifier is needed to properly drive them.Two other advantages of di - Designing for low distortion with high-speed op ampsPDF, 277 Kb, 档案已发布: Mar 2, 2005
- Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, 修订版: A, 档案已发布: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
模型线
系列: THS4521 (4)
- THS4521ID THS4521IDGKR THS4521IDGKT THS4521IDR
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)