Datasheet LMC660CM - National Semiconductor OP AMP, QUAD CMOS, SMD, SOIC14, 660 — 数据表
Part Number: LMC660CM
详细说明
Manufacturer: National Semiconductor
Description: OP AMP, QUAD CMOS, SMD, SOIC14, 660
Docket:
LMC660 CMOS Quad Operational Amplifier
August 2000
LMC660 CMOS Quad Operational Amplifier
General Description
The LMC660 CMOS Quad operational amplifier is ideal for operation from a single supply.
It operates from +5V to +15V and features rail-to-rail output swing in addition to an input common-mode range that includes ground. Performance limitations that have plagued CMOS amplifiers in the past are not a problem with this design. Input VOS, drift, and broadband noise as well as voltage gain into realistic loads (2 k and 600) are all equal to or better than widely accepted bipolar equivalents. This chip is built with National's advanced Double-Poly Silicon-Gate CMOS process. See the LMC662 datasheet for a dual CMOS operational amplifier with these same features. Ultra low input bias current: 2 fA Input common-mode range includes V- Operating range from +5V to +15V supply ISS = 375 µA/amplifier; independent of V+ Low distortion: 0.01% at 10 kHz Slew rate: 1.1 V/µs Available in extend
Specifications:
- Amplifier Type: CMOS
- Bandwidth: 0.5 MHz
- Base Number: 660
- Device Marking: LMC660CM
- Gain Bandwidth: 1.4 MHz
- I/O Type: Rail-Rail Outputs
- IC Generic Number: 660
- Input Offset Voltage Max: 6.3 mV
- Logic Function Number: 660
- Mounting Type: SMD
- Number of Amplifiers: 4
- Number of Pins: 14
- Op Amp Type: Low Input Bias
- Operating Temperature Range: Commercial
- Operational Amplifier Features: CMOS
- Package / Case: SOIC
- SVHC: No SVHC (15-Dec-2010)
- Slew Rate: 1.1 V/µs
- Supply Voltage + Nom: 5 V
- Supply Voltage Range: 4.75 V to 15.5 V
RoHS: Yes
Accessories:
- Dow Corning - 2265931
- Fischer Elektronik - ICK SMD A 5 SA
- Fischer Elektronik - WLK 5
- Roth Elektronik - RE932-03