Datasheet Texas Instruments OPA847IDBVTG4 — 数据表

制造商	Texas Instruments
系列	OPA847
零件号	OPA847IDBVTG4

具有关断功能的宽带，超低噪声，电压反馈运算放大器6-SOT-23 -40至85

数据表

下载

PDF, 884 Kb, 修订版: E, 档案已发布: Dec 30, 2008

从文件中提取

价格

状态

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	Yes

打包

Pin	6
Package Type	DBV
Industry STD Term	SOT-23
JEDEC Code	R-PDSO-G
Package QTY	250
Carrier	SMALL T&R
Device Marking	OATI
Width (mm)	1.6
Length (mm)	2.9
Thickness (mm)	1.2
Pitch (mm)	.95
Max Height (mm)	1.45
Mechanical Data	下载

参数化

2nd Harmonic	74 dBc
3rd Harmonic	100 dBc
@ MHz	5
Acl, min spec gain	12 V/V
Additional Features	Decompensated
Architecture	Bipolar,Voltage FB
BW @ Acl	600 MHz
CMRR(Min)	95 dB
CMRR(Typ)	110 dB
GBW(Typ)	3900 MHz
Input Bias Current(Max)	39000000 pA
Iq per channel(Max)	18.4 mA
Iq per channel(Typ)	18.1 mA
Number of Channels	1
Offset Drift(Typ)	1.5 uV/C
Operating Temperature Range	-40 to 85 C
Output Current(Typ)	75 mA
Package Group	SOT-23
Package Size: mm2:W x L	6SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG
Rail-to-Rail	No
Rating	Catalog
Slew Rate(Typ)	950 V/us
Total Supply Voltage(Max)	12 +5V=5, +/-5V=10
Total Supply Voltage(Min)	10 +5V=5, +/-5V=10
Vn at 1kHz(Typ)	0.85 nV/rtHz
Vn at Flatband(Typ)	0.85 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)	0.5 mV

生态计划

RoHS

Compliant

设计套件和评估模块

Evaluation Modules & Boards: DEM-OPA-SOT-1B
DEM-OPA-SOT-1B
Lifecycle Status: Active (Recommended for new designs)
- 下载
Evaluation Modules & Boards: DEM-OPA-ADS-SO-1A
DEM-OPA-ADS-SO-1A
Lifecycle Status: Preview (Device has been announced but is not in production. Samples may or may not be available)
Evaluation Modules & Boards: DEM-OPA-SO-1B
DEM-OPA-SO-1B
Lifecycle Status: Active (Recommended for new designs)
- 下载

应用须知

下载
Low-power, high-intercept interface to the ADS5424, 105-MSPS converter
PDF, 478 Kb, 档案已发布: Oct 10, 2005
下载
Transimpedance Considerations for High-Speed Operational Amplifiers
PDF, 193 Kb, 档案已发布: Nov 22, 2009
Designing high-resolution detection circuits using photodiodes presents considerable challenges because bandwidth, gain, and input-referred noise are coupled together. This application note reviews the basic issues of transimpedance design, provides a set of detailed design equations, explains those equations, and develops an approach to easily compare potential solutions.
下载
Using a decompensated op amp for improved performance
PDF, 352 Kb, 档案已发布: Mar 11, 2005
下载
RLC Filter Design for ADC Interface Applications (Rev. A)
PDF, 299 Kb, 修订版: A, 档案已发布: May 13, 2015
As high performance Analog-to-Digital Converters (ADCs) continue to improve in their performance, the last stage interface from the final amplifier into the converter inputs becomes a critical element in the system design if the full converter dynamic range is desired. This application note describes the performance and design equations for a simple passive 2nd-order filter used successfully in AD
下载
ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers
PDF, 273 Kb, 档案已发布: Apr 22, 2004
Once an analog-to-digital converter (ADC) and a driver/interface have been selected for a given application, the next step to achieving excellent performance is laying out the printed circuit board (PCB) that will support the application. This application report describes several techniques for optimizing a high-speed, 14-bit performance, differential driver PCB layout using a wideband operation
下载
Measuring Board Parasitics in High-Speed Analog Design
PDF, 134 Kb, 档案已发布: Jul 7, 2003
Successful circuit designs using high-speed amplifiers can depend upon understanding and identifying parasitic PCB components. Simulating a design while including PCB parasitics can protect against unpleasant production surprises. This application report discusses an easy method for measuring parasitic components in a prototype or final PC board design by using a standard oscilloscope and low freq
下载
Noise Analysis for High Speed Op Amps (Rev. A)
PDF, 256 Kb, 修订版: A, 档案已发布: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

模型线

系列: OPA847 (7)

OPA847ID OPA847IDBVR OPA847IDBVT OPA847IDBVTG4 OPA847IDG4 OPA847IDR OPA847IDRG4

制造商分类

Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)