Datasheet Texas Instruments OPA2670IRGVT — 数据表
| 制造商 | Texas Instruments |
| 系列 | OPA2670 |
| 零件号 | OPA2670IRGVT |
具有电源控制的单端口，高输出电流VDSL2线路驱动器16-VQFN -40至85
数据表
Dual Wideband, High Output Current Operational Amplifier with Power Control datasheet
PDF, 776 Kb, 档案已发布: Aug 19, 2010
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
打包
| Pin | 16 | 16 |
| Package Type | RGV | RGV |
| Industry STD Term | VQFN | VQFN |
| JEDEC Code | S-PQFP-N | S-PQFP-N |
| Package QTY | 250 | 250 |
| Carrier | SMALL T&R | SMALL T&R |
| Device Marking | IRGV | OPA2670 |
| Width (mm) | 4 | 4 |
| Length (mm) | 4 | 4 |
| Thickness (mm) | .9 | .9 |
| Pitch (mm) | .65 | .65 |
| Max Height (mm) | 1 | 1 |
| Mechanical Data | 下载 | 下载 |
参数化
| 2nd Harmonic | 71 dBc |
| 3rd Harmonic | 80 dBc |
| @ MHz | 10 |
| Acl, min spec gain | 1 V/V |
| Additional Features | Shutdown |
| Architecture | Current FB |
| BW @ Acl | 420 MHz |
| CMRR(Min) | 50 dB |
| CMRR(Typ) | 56 dB |
| GBW(Typ) | 1400 MHz |
| Input Bias Current(Max) | 24000000 pA |
| Iq per channel(Max) | 31.5 mA |
| Iq per channel(Typ) | 30.5 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 8 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 700 mA |
| Package Group | VQFN |
| Package Size: mm2:W x L | 16VQFN: 16 mm2: 4 x 4(VQFN) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 5000 V/us |
| Total Supply Voltage(Max) | 12.6 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 5.5 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 6 nV/rtHz |
| Vn at Flatband(Typ) | 3.6 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 6 mV |
生态计划
| RoHS | Compliant |
应用须知
- Tuning in AmplifiersPDF, 44 Kb, 档案已发布: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, 档案已发布: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, 档案已发布: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
模型线
系列: OPA2670 (2)
- OPA2670IRGVR OPA2670IRGVT
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)