Datasheet Texas Instruments PGA309AIPWTG4 — 数据表

制造商Texas Instruments
系列PGA309
零件号PGA309AIPWTG4
Datasheet Texas Instruments PGA309AIPWTG4

PGA309电压输出可编程传感器调节器16-TSSOP -40至125

数据表

Voltage Output Programmable Sensor Conditioner datasheet
PDF, 811 Kb, 修订版: C, 档案已发布: Jan 14, 2011
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

打包

Pin1616
Package TypePWPW
Industry STD TermTSSOPTSSOP
JEDEC CodeR-PDSO-GR-PDSO-G
Package QTY250250
CarrierSMALL T&RSMALL T&R
Device MarkingPGA309A
Width (mm)4.44.4
Length (mm)55
Thickness (mm)11
Pitch (mm).65.65
Max Height (mm)1.21.2
Mechanical Data下载下载

参数化

# Input Channels2
InterfaceUART
Operating Temperature Range-40 to 125 C
Package GroupTSSOP
Package Size: mm2:W x L16TSSOP: 32 mm2: 6.4 x 5(TSSOP) PKG
RatingCatalog
Resolution16 Bits
Vs(Max)5 V
Vs(Min)2.7 V

生态计划

RoHSCompliant

设计套件和评估模块

  • Evaluation Modules & Boards: PGA309EVM-USB
    PGA309 Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • JTAG Emulators/ Analyzers: SENSOREMULATOREVM
    SensorEmulatorEVM Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: MULTI-CAL-SYSTEM
    Multi-Cal-System Basic Starter Kit
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • PGA309 Microcontroller Application
    PDF, 58 Kb, 档案已发布: Jun 7, 2005
    The PGA309 programmable gain amplifier can be used with an external microcontroller. In this type of application, the PGA309 becomes a programmable sensor signal conditioner block that also measures temperature. One key feature of the PGA309 reviewed in this report is the test pin. This document then discusses two general applications for the PGA309 with an external microcontroller.
  • PGA309 Quick Start System Reference Guide (Rev. C)
    PDF, 9.4 Mb, 修订版: C, 档案已发布: Jan 13, 2006
    PGA309 Quick Start System Reference Guide
  • Practical Technique for Minimizing the Number of Measurements in Sensor Signal
    PDF, 155 Kb, 档案已发布: Jun 28, 2005
    The output of many modern bridge type sensors contains errors that must be eliminated through calibration. One major source of error is variation of sensor span and offset from device to device and their respective drifts with temperature. These drifts can be non-linear. Another source of error is the nonlinearity of the sensor output with applied stimulus. Signal conditioning electronics can also
  • PGA309 Noise Filtering (Rev. A)
    PDF, 704 Kb, 修订版: A, 档案已发布: Nov 28, 2005
    The PGA309 programmable gain amplifier generates three primary types of noise: broadband noise, noise from the instrumentation amplifier auto-zero circuit, and noise from the Coarse Offset auto-zero circuit. Noise at the PGA309 output can be reduced by limiting the bandwidth with a simple filter. This application note describes how to select the filter components in order to get the desired bandwi
  • Ratiometric measurement in the context of LVDT-sensor signal conditioning
    PDF, 228 Kb, 档案已发布: Jul 21, 2016
  • Using the XTR115 with the PGA309 to Generate 4mA to 20mA Output (Rev. B)
    PDF, 167 Kb, 修订版: B, 档案已发布: Apr 20, 2006
  • Analog linearization of resistance temperature detectors
    PDF, 152 Kb, 档案已发布: Nov 9, 2011
  • 4Q 2011 Issue Analog Applications Journal
    PDF, 943 Kb, 档案已发布: Nov 9, 2011

模型线

系列: PGA309 (4)

制造商分类

  • Semiconductors > Sensing Products > Resistive Bridge Sensor Signal Conditioners