TSSP930.. www.vishay.com Vishay Semiconductors IR Sensor Module for Reflective Sensor, Light Barrier,and Fast Proximity ApplicationsFEATURES • Up to 2 m for presence and proximity sensing • Up to 20 m distance for light curtain application • Uses continuous AC signal or burst pattern of infrared light • Small sensitivity scattering range • PIN diode and sensor IC in one package • Low supply current • Shielding against EMI • Visible light is suppressed by IR filter • Insensitive to supply voltage ripple and noise 23051 • Supply voltage: 2.0 V to 3.6 V ADDITIONAL RESOURCES • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 D 33 D 3D Models DESCRIPTIONMECHANICAL DATA The TSSP930.. device is the latest generation of compact infrared detector module for presence, proximity, or light Pinning: curtain applications. They provide an active low output in 1 = OUT, 2 = GND, 3 = VS response to infrared bursts at 940 nm. The frequency of the burst should correspond to the carrier frequency shown in APPLICATIONS the parts table. • Reflective sensors for hand dryers, towel or soap This component has not been qualified according to dispensers, water faucets, toilet flush automotive specifications. • Vending machine fall detection • Security and pet gates • Person or object vicinity switch • Fast proximity sensors for toys, robotics, drones, and other consumer and industrial uses PARTS TABLE 38 kHz TSSP93038 Carrier frequency 56 kHz TSSP93056 Package Minimold Pinning 1 = OUT, 2 = GND, 3 = VS Dimensions (mm) 5.4 W x 6.35 H x 4.9 D Mounting Leaded Application Presence sensors, fast proximity sensors BLOCK DIAGRAMPRESENCE SENSING 16833_8 +3 V 3 IR emitter VS 33 kΩ Envelope 1 signal OUT Band Demo- 38 kHz Input AMP pass dulator +3 V 2 Out to PIN GND μC Rev. 1.2, 31-Jul-2019 1 Document Number: 82866 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000