Datasheet TLP170GM (Toshiba) - 4

TLP170GM 8. Electrical Characteristics (Unless otherwise specified, Ta = 25 ) Characteristics Symbol Note Test Condition Min Typ. Max Unit LED Input forward voltage VF IF = 10 mA 1.1 1.27 1.4 V Input reverse current IR VR = 5 V   10 µA Input capacitance Ct V = 0 V, f = 1 MHz  30  pF Detector OFF-state current IOFF VOFF = 350 V  0.001 1 µA Output capacitance COFF V = 0 V, f = 1 MHz  30  pF 9. Coupled Electrical Characteristics (Unless otherwise specified, Ta = 25 ) Characteristics Symbol Note Test Condition Min Typ. Max Unit Trigger LED current IFT ION = 110 mA  0.2 1 mA Return LED current IFC IOFF = 100 µA 0.01 0.2  mA ON-state resistance RON ION = 110 mA, IF = 2 mA, t < 1 s  22 35 Ω ION = 110 mA, IF = 2 mA  28 50 10. Isolation Characteristics (Unless otherwise specified, Ta = 25 ) Characteristics Symbol Note Test Condition Min Typ. Max Unit Total capacitance (input to output) CS (Note 1) VS = 0 V, f = 1 MHz  0.8  pF Isolation resistance RS (Note 1) VS = 500 V, R.H. ≤ 60 % 5 × 1010 1014  Ω Isolation voltage BVS (Note 1) AC, 60 s 3750   Vrms Note 1: This device is considered as a two-terminal device: Pins 1 and 3 are shorted together, and pins 4 and 6 are shorted together. 11. Switching Characteristics (Unless otherwise specified, Ta = 25 ) Characteristics Symbol Note Test Condition Min Typ. Max Unit Turn-on time tON See Fig. 11.1  1 2 ms RL = 200 Ω, VDD = 20 V, IF = 2 mA Turn-off time tOFF  0.5 1 Fig. 11.1 Switching Time Test Circuit and Waveform ©2020 4 2020-05-13 Toshiba Electronic Devices & Storage Corporation Rev.1.0