Datasheet ST7LITEUSx (STMicroelectronics) - 6
| 制造商 | STMicroelectronics |
| 描述 | 8-bit MCU with single voltage Flash memory, ADC, timers. ST7ULTRALITE (ST7LITEUS2, ST7LITEUS5) |
| 页数 / 页 | 108 / 6 — ST7LITEUSx. PIN DESCRIPTION. Figure 4. 16-pin package pinout. Note 1. … |
| 文件格式/大小 | PDF / 889 Kb |
| 文件语言 | 英语 |
ST7LITEUSx. PIN DESCRIPTION. Figure 4. 16-pin package pinout. Note 1. Notes:
该数据表的模型线
- ST7FLITEUS2B3 ST7FLITEUS2B6 ST7FLITEUS2M3 ST7FLITEUS2M3TR ST7FLITEUS2M6 ST7FLITEUS2M6TR ST7FLITEUS2U3TR ST7FLITEUS2U6TR ST7FLITEUS5B3 ST7FLITEUS5B6 ST7FLITEUS5M3 ST7FLITEUS5M3TR ST7FLITEUS5M6 ST7FLITEUS5M6TR ST7FLITEUS5U3 ST7FLITEUS5U3TR ST7FLITEUS5U6 ST7FLITEUS5U6TR ST7FLITEUSICD ST7PLITEUS2B3 ST7PLITEUS2B6 ST7PLITEUS2M3 ST7PLITEUS2M3TR ST7PLITEUS2M6 ST7PLITEUS2M6TR ST7PLITEUS2U3TR ST7PLITEUS2U6TR ST7PLITEUS5B3 ST7PLITEUS5B6 ST7PLITEUS5M3 ST7PLITEUS5M3TR ST7PLITEUS5M6 ST7PLITEUS5M6TR ST7PLITEUS5U3 ST7PLITEUS5U3TR ST7PLITEUS5U6 ST7PLITEUS5U6TR
文件文字版本
ST7LITEUSx PIN DESCRIPTION
(Cont’d)
Figure 4. 16-pin package pinout
(For development or tool prototyping purposes only. Package not orderable in production quantities.) Reserved 1) 1 16 NC VDD 2 15 VSS RESET 3 ei0 14 PA0 (HS) / AIN0 / ATPWM ICCCLK 4 ei1 13 PA1 (HS) / AIN1 PA5 (HS) / AIN4 / CLKIN 5 ei4 12 NC 6 ei3 PA4 (HS) / AIN3 11 ICCDATA PA3 7 ei2 10 PA2 (HS) / LTIC / AIN2 NC 8 9 NC
Note 1
: must be tied to ground
Notes:
The differences versus the 8-pin packages are list-
3.
PA3 pin is always configured as output. Any ed below: change on multiplexed IO reset control registers
1.
The ICC signals (ICCCLK and ICCDATA) are (MUXCR1 and MUXCR2) will have no effect on mapped on dedicated pins. PA3 functionality. Refer to “REGISTER DESCRIP- TION” on page 24.
2.
The RESET signal is mapped on a dedicated pin. It is not multiplexed with PA3. 6/108 1
(Cont’d)
Figure 4. 16-pin package pinout
(For development or tool prototyping purposes only. Package not orderable in production quantities.) Reserved 1) 1 16 NC VDD 2 15 VSS RESET 3 ei0 14 PA0 (HS) / AIN0 / ATPWM ICCCLK 4 ei1 13 PA1 (HS) / AIN1 PA5 (HS) / AIN4 / CLKIN 5 ei4 12 NC 6 ei3 PA4 (HS) / AIN3 11 ICCDATA PA3 7 ei2 10 PA2 (HS) / LTIC / AIN2 NC 8 9 NC
Note 1
: must be tied to ground
Notes:
The differences versus the 8-pin packages are list-
3.
PA3 pin is always configured as output. Any ed below: change on multiplexed IO reset control registers
1.
The ICC signals (ICCCLK and ICCDATA) are (MUXCR1 and MUXCR2) will have no effect on mapped on dedicated pins. PA3 functionality. Refer to “REGISTER DESCRIP- TION” on page 24.
2.
The RESET signal is mapped on a dedicated pin. It is not multiplexed with PA3. 6/108 1