Datasheet ATBTLC1000-MR (Microchip) - 9

link to page 10 link to page 10
ATBTLC1000-MR110CA Pinout Information ...continued ATBTLC1000- Pin Name Pin Type Description/Default Function MR110CA Pin No.
3 LP_GPIO_1 Digital I/O SWDIO UART RXD 4 LP_GPIO_2 Digital I/O Default function (6-wire mode): UART1_RXD Alternate (4-wire mode): UART1_RXD UART_TXD 5 LP_GPIO_3 Digital I/O Default function (6-wire mode): UART1_TXD Alternate (4-wire mode): UART1_TXD 6 VBAT Power Power supply pin for the DC/DC convertor UART_CTS Default function (6-wire mode): GPIO with 7 LP_GPIO_8(1) Digital I/O Programmable Pull Up/Down Alternate (4-wire mode): UART1_CTS UART_RTS Default function (6-wire mode): GPIO with 8 LP_GPIO_9(1) Digital I/O Programmable Pull Up/Down Alternate (4-wire mode): UART1_RTS 9 GND Ground - SPI SCK/SPI Flash SCK Default function (6-wire mode): UART2_RTS 10 LP_GPIO_10 Digital I/O Alternate (4-wire mode): GPIO with Programmable Pull Up/Down SPI MOSI/SPI Flash TXD Default function (6-wire mode): UART2_CTS 11 LP_GPIO_11 Digital I/O Alternate (4-wire mode): GPIO with Programmable Pull Up/Down SPI SSN/SPI Flash SSN Default function (6-wire mode): UART2_TXD 12 LP_GPIO_12 Digital I/O Alternate (4-wire mode): GPIO with Programmable Pull Up/Down 13 GND Ground - © 2019 Microchip Technology Inc.
Datasheet
DS70005393A-page 9 Document Outline Introduction Features Table of Contents 1. Ordering Information 2. Package Information 3. Block Diagram 4. Pinout Information 4.1. Pin Description 5. Device States 5.1. Description of Device States 5.2. Controlling the Device States 6. Host Microcontroller Interface 7. Clocking 7.1. 26 MHz Crystal Oscillator (XO) 7.2. 32.768 kHz RTC Crystal Oscillator (RTC XO) 7.2.1. General Information 7.2.2. RTC XO Design and Interface Specification 7.2.3. RTC Characterization with Gm Code Variation 7.2.4. RTC Characterization with Supply Variation and Temperature 7.3. 2 MHz and 26 MHz Integrated RC Oscillators 8. Electrical Characteristics 8.1. Absolute Maximum Ratings 8.2. Recommended Operating Conditions 8.3. Current Consumption in Device States 8.4. Receiver Performance 8.5. Transmitter Performance 9. ATBTLC1000-MR110CA Module Outline Drawing 10. ATBTLC1000-MR110CA Reference Schematic 10.1. Reference Schematics 11. Placement and Routing Guidelines 11.1. Power and Ground 11.2. Interferers 12. Reflow Profile Information 12.1. Storage Condition 12.1.1. Moisture Barrier Bag Before Opening 12.1.2. Moisture Barrier Bag Open 12.2. Stencil Design 12.3. Soldering and Reflow Condition 12.3.1. Reflow Oven 12.4. Baking Conditions 12.5. Module Assembly Considerations 13. Regulatory Approval 13.1. United States (FCC) 13.1.1. Labeling And User Information Requirements 13.1.2. RF Exposure 13.1.3. Helpful Websites 13.2. Canada (ISED) 13.2.1. Labeling and User Information Requirements 13.2.2. RF Exposure 13.2.3. Helpful Websites 13.3. Japan 13.3.1. Labeling and User Information Requirements 13.3.2. Helpful Websites 13.4. Other Regulatory Information 14. Reference Documentation 15. Document Revision History The Microchip Web Site Customer Change Notification Service Customer Support Microchip Devices Code Protection Feature Legal Notice Trademarks Quality Management System Certified by DNV Worldwide Sales and Service